Home and business EV charger installation, panel upgrades, and repair in Dallas, planned and overseen by a Texas Master Electrician.
Dallas drivers have more EV choices than ever, and more of them are charging at home. Whether you live in a Lake Highlands ranch, a Preston Hollow estate, a Lakewood bungalow, or a townhome near Uptown, a dedicated Level 2 charger turns your parking spot into your fuel station. Our office sits on Emily Road in North Dallas, so we’re close to neighborhoods across the city, from Far North Dallas and Lake Highlands to Oak Cliff and East Dallas.
Our office is at 13151 Emily Rd, Dallas, TX 75240, and we schedule installations and service calls throughout Dallas and nearby communities. Call 214-253-1880 or request a quote online.
Dallas housing ranges from 1920s homes in the M Streets and Kessler Park to brand-new construction in Far North Dallas, and the electrical systems vary just as widely. Older homes may have 100-amp service, crowded panels, or panel brands we recommend replacing before adding a heavy continuous load. Many Dallas homes also have rear-entry or alley-loaded garages, which affects where the panel sits relative to the parking spot. We look at all of it before quoting, so the charger you choose is matched to what your home can safely support.
Dallas has a wide mix of older homes, new construction, apartments, and commercial properties, so no two charger projects look the same. We look at the panel, the parking location, and how the charger will actually be used before recommending a charger size, a wiring route, or an upgrade.
Choosing a charger for your Dallas home starts with your vehicle. Every EV has a maximum AC charging rate, so a 48-amp charger won’t charge a 32-amp car any faster. We help you compare hardwired and plug-in options, cable length for how you park, smart features like scheduling and energy tracking, and whether a power-sharing charger makes sense if your household has more than one EV. If you’ve already bought a Tesla Wall Connector, ChargePoint, Emporia, Grizzl-E, Wallbox, or Autel charger, send us the model and we’ll confirm it works with your panel.
We handle the paperwork. For Dallas projects that require an electrical permit, we file it, schedule the inspection, and keep you informed. If your panel or service needs to be upgraded, we coordinate with Oncor, the delivery utility for most of North Texas and plan the work to minimize downtime.
Several factors shape the cost of EV charger installation in Dallas: the charger’s amperage, the distance from your panel to the parking spot, the wiring method, whether your panel has space and capacity, and whether a permit is required. A charger mounted next to the panel in an attached garage is usually the simplest job. Detached garages, outdoor pedestals, and panel upgrades add time and materials, and we’ll explain each item in your written quote.
Dallas businesses are adding workplace charging in office parks along the LBJ and Dallas North Tollway corridors, and apartment owners from Uptown to Deep Ellum are fielding requests from residents with EVs. We plan commercial and multifamily installations around parking layout, available capacity, and how many chargers you may want later. Learn about commercial EV charger installation.
EV charger problems usually show up as a tripped breaker, a charger that won’t start, or a warm or discolored outlet. If that happens at your Dallas home or business, turn off the breaker and call us. We find the cause, whether it’s an undersized circuit, a loose termination, a worn receptacle, or a fault in the unit, and fix the electrical side properly so it doesn’t happen again. More about EV charger repair.
Choosing an EV charger electrician in Dallas is about more than mounting a box on the wall. Our Master Electrician-led team checks your panel, sizes the circuit for continuous load, follows code, and tests the charger with your vehicle where possible. You get a safe, reliable installation and a clear explanation of what was done.
Level 2 chargers for garages, driveways, and detached buildings, with the circuit sized for your vehicle and panel.
Workplace, retail, hospitality, fleet, and multifamily charging, planned for how drivers use your property.
Breaker trips, chargers that won’t start, slow charging, overheated outlets, and offline stations.
Load calculations, load management, subpanels, and panel or service upgrades when capacity is tight.
An EV charger installation in Dallas starts with a load calculation on your panel, then a dedicated 240-volt circuit sized at 125% of the charger’s output, the wiring run to your parking spot, mounting and connecting the charger, a permit and inspection where the city requires one, and a test charge before we leave.
From the first photo you send to the final test, you’ll know what your Dallas project involves and what it costs before work begins.
Every job is planned or reviewed by a Texas Master Electrician, so circuit sizing, permits, and code requirements are handled correctly the first time.
Send your city, property type, and charger model if you know it. Photos of the parking area and the outside of the panel help.
We review equipment placement, electrical capacity, the wiring route, permits, and any site work that could affect your quote.
Once the scope is agreed, we complete the work, test the charger under load, and walk you through it before we leave.
Straight answers to the questions DFW drivers and property owners ask most.
In most North Texas cities, a new 240-volt circuit for an EV charger requires an electrical permit pulled by a licensed electrical contractor. We check the City of Dallas’s current requirements for your address and handle the permit and inspection when one is required.
It depends on the scope. A straightforward garage installation near the panel is often completed in a single visit once scheduled, while panel upgrades, long wire runs, and permit inspections add time. We give you a realistic timeline with your quote.
Yes. Send us the make and model and we’ll confirm it’s compatible with your vehicle and your electrical system. We install Tesla Wall Connectors, ChargePoint, Emporia, Grizzl-E, Wallbox, Autel, and most other UL-listed Level 2 chargers.
Yes. Along with Dallas, we serve Richardson, Garland, Irving, Addison, Farmers Branch, University Park and the rest of Dallas County, plus cities across Dallas–Fort Worth.
Yes. We troubleshoot chargers that trip breakers, won’t start a session, charge slowly, or have overheated outlets, for home and commercial installations.
Share your city, property type, and where you want the charger installed. If you already have a charger, include its make and model. For a business or community, let us know how many parking spaces you’d like to serve and whether you have a target timeline.
13151 Emily Rd, Dallas, TX 75240