Charge overnight at home with a Level 2 charger sized for your vehicle and your electrical panel. Garage, driveway, carport, and detached-garage installations across DFW.
A home EV charger installation includes a load calculation on your electrical panel, a dedicated 240-volt circuit sized for the charger, the wiring run to your parking spot, mounting and connecting the charger, any required permit and inspection, and a test charge before we leave.
A standard 120-volt outlet adds only a few miles of range per hour. A Level 2 charger on a dedicated 240-volt circuit can fully recharge most EVs overnight. We help you choose the right setup and install it cleanly.
The most common setup: a wall-mounted charger near where you park, wired from a nearby panel with a clean, code-compliant route.
Weather-rated chargers mounted outside with outdoor-rated conduit and fittings, positioned so the cable reaches without crossing walkways.
Longer circuits sized for voltage drop, with conduit or underground wiring when the parking area is away from the house.
Hardwired Wall Connector installs with the circuit and the unit’s amperage setting matched to your panel.
High-quality 240-volt receptacles installed for continuous EV load, for drivers who prefer a plug-in charger.
Power-sharing chargers and load management so two vehicles can charge without a costly service upgrade.
Straight answers to the questions DFW drivers and property owners ask most.
Most home Level 2 chargers run on a dedicated 240-volt circuit between 40 and 60 amps. A 48-amp charger needs a 60-amp circuit, a 40-amp charger needs a 50-amp circuit, and a 32-amp charger needs a 40-amp circuit.
Yes. Outdoor chargers need a weather-rated enclosure and suitable conduit, and detached garages often need a longer run or underground wiring. We plan the route and size the wire for the distance.
Hardwired chargers allow higher output and remove the receptacle as a point of wear, so we usually recommend them for daily charging and outdoor locations. A NEMA 14-50 can work well with a quality receptacle installed for continuous load.
Yes, with chargers that support power sharing or with a load management device. Both vehicles charge from one circuit and split the available power, which can avoid a panel upgrade.
Yes. Send us the model or a product link and we’ll confirm it’s compatible with your vehicle, your electrical panel, and the location you have in mind before installation day. We install Tesla Wall Connectors, ChargePoint, Emporia, Grizzl-E, Wallbox, Autel, and most other UL-listed Level 2 chargers.
The biggest factors are the charger’s amperage, the distance from your electrical panel to the parking spot, whether the panel has room for a new 240-volt breaker, the wiring method (inside walls, attic, conduit, or underground), and whether a permit is required. Outdoor locations and multiple chargers may need a more detailed site review.
Not always. We run a load calculation on your existing service before recommending anything. Many homes can add a dedicated EV circuit as-is; others can use a smaller circuit or a load management device instead of a full panel or service upgrade.
We install home EV chargers throughout Dallas–Fort Worth, including these communities:
Dallas · Fort Worth · Plano · Frisco · McKinney · Allen · Prosper · Celina · Murphy · Wylie · Lucas · Fairview · Richardson · Garland · Irving · Carrollton · Coppell · Addison · Farmers Branch · Mesquite · Rowlett · Sachse · Highland Park · University Park · All service areas
Share your city, property type, and where you want the charger installed. If you already have a charger, include its make and model. For a business or community, let us know how many parking spaces you’d like to serve and whether you have a target timeline.
13151 Emily Rd, Dallas, TX 75240