Home and business EV charger installation, panel upgrades, and repair in Irving, planned and overseen by a Texas Master Electrician.
Irving is home to Las Colinas, Valley Ranch, and many apartment and townhome communities, so EV charging here spans single-family homes, multifamily properties, and corporate offices. We install residential and commercial EV chargers across Irving, with a Texas Master Electrician leading every project.
Our office is at 13151 Emily Rd, Dallas, TX 75240, and we schedule installations and service calls throughout Irving and nearby communities. Call 214-253-1880 or request a quote online.
Irving homeowners in Valley Ranch and other established neighborhoods often have attached garages with the panel nearby, keeping installs straightforward. Older homes in central and south Irving may need a panel check or upgrade first. Townhome owners sometimes face HOA rules or shared walls, so we review where the charger can go and what approvals may be needed.
Irving is home to many offices, hotels, and apartment communities as well as single-family neighborhoods. We help businesses plan workplace and guest charging, and we help homeowners add a dedicated Level 2 circuit without overloading their existing service.
Not sure which charger to buy? Many Irving homeowners ask us before they order. We look at your vehicle’s onboard charger, your daily driving, and your panel’s spare capacity, then suggest a charger and circuit size that fit. Outdoor locations need a weather-rated enclosure, and two-EV households can often share one circuit with power-sharing chargers. We install most UL-listed Level 2 chargers, including Tesla Wall Connectors.
In most North Texas cities, adding a 240-volt EV charging circuit requires an electrical permit pulled by a licensed contractor, followed by an inspection. We confirm the City of Irving’s current requirements for your address and handle the permit and inspection when one is required. If your project needs a service upgrade, we coordinate with Oncor, the delivery utility for most of North Texas.
Every Irving quote we write lists the charger size, circuit size, wiring route, permit, and any panel work, so you can compare it fairly. The biggest variables are distance and capacity. Short runs in attached garages cost less; long runs to detached garages or driveways, underground conduit, or service upgrades cost more. Sending photos of your panel and parking area helps us quote accurately.
Las Colinas office towers, hotels, and apartment communities are prime candidates for workplace, guest, and resident charging. We help property managers plan networked chargers, access control, and phased expansion. Learn about commercial EV charger installation.
EV charger problems usually show up as a tripped breaker, a charger that won’t start, or a warm or discolored outlet. If that happens at your Irving home or business, turn off the breaker and call us. We find the cause, whether it’s an undersized circuit, a loose termination, a worn receptacle, or a fault in the unit, and fix the electrical side properly so it doesn’t happen again. More about EV charger repair.
Irving homeowners and businesses work with us because we explain things clearly and do the work right the first time. Every job is led by a Texas Master Electrician, every circuit is sized for continuous EV load, and every charger is tested before we leave. If capacity is tight, we explain the options instead of pushing the most expensive one.
Level 2 chargers for garages, driveways, and detached buildings, with the circuit sized for your vehicle and panel.
Workplace, retail, hospitality, fleet, and multifamily charging, planned for how drivers use your property.
Breaker trips, chargers that won’t start, slow charging, overheated outlets, and offline stations.
Load calculations, load management, subpanels, and panel or service upgrades when capacity is tight.
An EV charger installation in Irving starts with a load calculation on your panel, then a dedicated 240-volt circuit sized at 125% of the charger’s output, the wiring run to your parking spot, mounting and connecting the charger, a permit and inspection where the city requires one, and a test charge before we leave.
From the first photo you send to the final test, you’ll know what your Irving project involves and what it costs before work begins.
Every job is planned or reviewed by a Texas Master Electrician, so circuit sizing, permits, and code requirements are handled correctly the first time.
Send your city, property type, and charger model if you know it. Photos of the parking area and the outside of the panel help.
We review equipment placement, electrical capacity, the wiring route, permits, and any site work that could affect your quote.
Once the scope is agreed, we complete the work, test the charger under load, and walk you through it before we leave.
Straight answers to the questions DFW drivers and property owners ask most.
In most North Texas cities, a new 240-volt circuit for an EV charger requires an electrical permit pulled by a licensed electrical contractor. We check the City of Irving’s current requirements for your address and handle the permit and inspection when one is required.
It depends on the scope. A straightforward garage installation near the panel is often completed in a single visit once scheduled, while panel upgrades, long wire runs, and permit inspections add time. We give you a realistic timeline with your quote.
Yes. Send us the make and model and we’ll confirm it’s compatible with your vehicle and your electrical system. We install Tesla Wall Connectors, ChargePoint, Emporia, Grizzl-E, Wallbox, Autel, and most other UL-listed Level 2 chargers.
Yes. Along with Irving, we serve Dallas, Coppell, Grapevine, Farmers Branch and the rest of Dallas County, plus cities across Dallas–Fort Worth.
Yes. We troubleshoot chargers that trip breakers, won’t start a session, charge slowly, or have overheated outlets, for home and commercial installations.
Share your city, property type, and where you want the charger installed. If you already have a charger, include its make and model. For a business or community, let us know how many parking spaces you’d like to serve and whether you have a target timeline.
13151 Emily Rd, Dallas, TX 75240