EV charger repair

EV Charger Repair & Troubleshooting

Charger not charging? Breaker tripping? Station offline? We find the cause and fix the electrical side, for home and commercial chargers across DFW.

Quick answer

What should I do if my EV charger stops working?

Check the charger’s status light and app for an error code, then reset the breaker once. If the breaker trips again, the outlet or wiring feels warm, or you see discoloration, turn the breaker off and call an electrician. Don’t keep resetting it.

Problems we troubleshoot

Breaker trips

Undersized breakers, loose terminations, ground faults, and moisture in outdoor installations.

Charger won't start

Fault lights, ground fault errors, and sessions that never begin or stop right away.

Slow charging

Amperage settings, circuit limits, voltage drop on long runs, and load management configuration.

Overheated receptacles

Melted or discolored NEMA 14-50 and 6-50 receptacles replaced with properly rated devices, or converted to hardwired.

Commercial stations offline

Power, connectivity, and fault diagnosis for networked chargers, with manufacturer coordination.

Charger replacement and relocation

Swap an old charger for a new one or move it to a better location, reusing the circuit when it’s suitable.

EV charger repair FAQs

Straight answers to the questions DFW drivers and property owners ask most.

Why does my EV charger keep tripping the breaker?

Common causes are a breaker that’s undersized for the charger’s setting, a loose or overheated connection, a worn receptacle on a plug-in charger, moisture in an outdoor installation, or a ground fault. We test the circuit and connections to find the cause.

Why won't my charger start a session?

It could be a configuration or Wi-Fi issue, a ground fault detected by the charger, a problem with the circuit, or a fault inside the unit. We test the electrical side first, then help you work with the manufacturer if the charger itself needs warranty service.

My NEMA 14-50 outlet is warm or discolored. Is that dangerous?

Yes, stop using it. Heat or discoloration at a receptacle usually means a loose connection or a receptacle not suited for continuous load. Turn off the breaker and have it inspected and replaced.

Do you repair chargers you didn't install?

Yes. We troubleshoot and repair the wiring, breakers, and connections for any home or commercial charger, regardless of who installed it.

Request EV charger repair

Tell us your charger make and model, the error message or status light, what happens when you try to charge, and when the problem started. Photos of the charger, the breaker, and any outlet help.

13151 Emily Rd, Dallas, TX 75240